Testimonials

"When friends and family come to visit, they first remark on the pine smell, then on the flow of the floor plan. Most people love the bamboo flooring and the gigantic closets."

Peter Sneed

Troy

Maine

Camp and Cabin Series Materials List

Below is a comprehensive listing of materials provided with each Northeastern Log Homes Camp and Cabin Homes, including.   = Starter Package Materials

Floor System

Sills: 2 x 6 PTSYP (graded #1 Pressure Treated Southern Yellow Pine)
Girders: 2 x 8 built up on job
Double headers: 2 x 8 spruce
Felt paper: To cover double headers and sills
Floor joists: 2 x 8 spruce 16” O.C. (On Center)
Hardware: Floor joist hangers; metal cross bridging
Subfloor: 5/8” T&G (Tongue and Groove) OSB (Oriented Strand Board)
Porch and deck floor framing: Floor joists, sills and headers — 2 x 6 PTSYP
Porch and deck flooring: 5/4 x 6 radius edge PTSYP
Porch posts (if shown on plan)
< top of page

Exterior Walls

Wall and gable logs: Eastern White Pine, Camp and Cabin grade, milled 6 x 8 “D” shaped tongue and groove pre-cut and numbered logs with preservative treatment. Camp and Cabin grade logs have imperfections and a more rustic look.
Log sealants: Puttylastic caulking; foam gaskets; pre-compressed corner pads; 12" sprial spikes
Window and door jambs: Specially-milled pine with 9” screws
Log siding: Milled ship-lap log siding as needed for floor frame skirting. Eastern White Pine, preservative treated
Wall braces: 6 x 6 or 6 x 8 as required with hardware
Splined posts: Specially milled 6 x 6 as required with hardware
2 sets of construction documents
Construction Manual
< top of page

Ceiling

Ceiling joists: 2 x 8 spruce 16” O.C.
Hardware: Ceiling joist hangers; metal cross bridging
Floor: 5/8” T&G OSB
Posts and beams: Spruce or LVL (laminated veneer lumber) as required with hardware
< top of page

Roof

Double plate on top of log
Roof rafters: 2 x 8 spruce 16” O.C.
Ridge beam*: LVL
Ridge beam support: 6 x 6 spruce post; ridge to post connectors; rafter and heel connectors*
Roof sheathing: 5/8” square edge OSB
Fascia: 1” pine boards
Soffits: 1” knotty pine v-match boards
Porch rafters: 2 x 6 spruce 16” O.C.
Porch beam: 6 x 8 spruce
Vents: Ridge and soffit
* Required for any building over 16’-0” wide
< top of page

Windows And Exterior Doors

Windows: Andersen® 400 Series Low-E4 glass Tilt-Wash double-hung and Casement windows with full screens (no grilles). Colors: White- Sandtone — Terratone® — Forest Green.
Flexiframes without grilles
Gliding patio doors: Andersen 400 Series Low-E4 Frenchwood® with screens, hardware and locksets (no grilles). Colors: White — Sandtone — Terratone® — Forest Green.
Exterior doors: 3’0” x 6’8” pre-hung Therma-Tru® Smooth-Star® fiberglass door system (no grilles), 20 year limited warranty
Exterior locksets: Schlage®
Backer rod
Exterior window and door trim: Random length pine specially milled 2 x 4 radius edges
< top of page

Optional Materials

Extra log rows
11” FastenMaster® LogHog screws
Interior wall framing material

1” knotty pine v-match boards for sheathing of interior roof, wall framing, ceiling, and interior window and door trim
Interior doors: solid pine with raised panel interior doors, pre-hung or sliding with hardware and Schlage® interior locksets as required
4 x 8 spruce exposed beam ceiling joists with hangers and 2” v-match loft flooring
Rigid insulation
AdvanTech® subfloor, ceiling, and roof sheathing
Grilles

< top of page

NOTE: Nominal dimensions are used to describing the above lumber sizes.

Click "DOWNLOAD PDF" for the material package price on any of the models in the Premier, Traditional or Camp and Cabin series.  Please of course feel free to contact us by clicking here, or calling us directly at 800-624-2797!