Northeastern Log Homes

Home > Home Plans > Materials

FLOOR SYSTEM

Sills: 2 x 6 PTSYP (graded #1 Pressure Treated Southern Yellow Pine)
Girders: LVL (Laminated Veneer Lumber)
Double headers: 2 x 8 or 2 x 10 spruce as required
Floor joists: 2 x 8 or 2 x 10 spruce 16" O.C. (On Center) as required
Subfloor: 5/8" T&G (Tongue & Groove) OSB (Oriented Strand Board)
Porch and deck floor framing: Floor joists, sills and headers - 2 x 6, 2 x 8 or 2 x 10 PTSYP
Porch and deck flooring: 5/4 x 6 radius edge PTSYP
Felt paper: Covering headers and sills
Hardware: Floor joist hangers and metal cross bridging as required

WALLS AND GABLES

Wall and gable logs: Eastern White Pine, Traditional grade, milled 6 x 8 "D" shaped tongue and groove pre-cut and numbered logs with preservative treatment
Log sealants: Puttylastic caulking; foam gaskets; pre-compressed corner pads; 11.8" FastenMaster® LogHog-SR (Settling Resistant Screws)
Window and door jambs: Specially-milled pine with 8" spikes
Log siding: Milled ship-lap log siding as needed for floor frame skirting, dormers, and shed porch gables. Eastern White Pine, preservative treated
Wall braces: 6 x 6, 6 x 8 or glulam as required with hardware
Specially milled 6 x 6 splined posts as required

CEILINGS

ROOF SYSTEM

Double plate on top of log
Rafters: 2 x 8 or 2 x 10, 16" O.C. or pre-built truss rafters with hardware, 24" O.C. as designed NOTE: We do not supply temporary or permanent bracing.
Ladder and fly rafter materials
Rafter tails: 2 x 6, 16" O.C.
Ridge beam: LVL
Ridge beam support: 6 x 6 or glulam post, ridge to post connector, sloped rafter hangers, and heel connectors
Roof sheathing: 5/8" square edge OSB
Roof strapping: 1 x 4 spruce boards (only when supplying knotty pine v-match roof boards to cover underside of rafters)
Fascia: 1" knotty pine boards
Soffit: 1" knotty pine v-match boards
Vents: Ridge and soffit
Roof boards: 1" knotty pine v-match boards supplied to cover bottom side of roof rafters
Porch rafters: 2 x 6 or 2 x 8 as required, 16" O.C.
Porch roof sheathing: 5/8" square edge OSB

WINDOWS AND DOORS

Andersen® 400 Series Low-E4 glass Tilt-Wash double-hung and casements with screens. Colors: White - Sandtone - Terratone® - Forest Green
Andersen 400 Series Frenchwood® hinged Low-E4 glass patio doors, Andersen 400 Series Frenchwood gliding Low-E4 glass patio doors complete with screens, hardware and locksets
Exterior doors: 3'0"x 6'8" pre-hung Therma-Tru® Smooth-Star® fiberglass door system (no grilles)
Exterior locksets: Yale®
Backer rod
Exterior window and door trim: Random length pine 2 x 4 radius edge
Interior window trim: From 1" knotty pine v-match boards

MISCELLANEOUS MATERIALS SUPPLIED PER PLAN

Basement stairs: 2 x 12 stringers and treads with 1" pine risers
Pilaster stud hardware for interior partitions
Loft stairs: 2 x 12 stringers, SYP, (Southern Yellow Pine) treads with 1" pine risers
Porch posts: 6 x 6 spruce
Dormer framing: 2 x 6, 24" O.C.
Dormer sheathing: 7/16" square edge OSB
Felt paper: To cover the dormer sheathing
House sill tie downs from galvanized banding
Splined posts: Specially milled 4 x 6 and 6 x 6 as required
4 x 8 ledger at open to roof areas to support rafter heel
Porch knee wall material

Optional Materials

Floor System

Pressure-treated railings: 2 x 2, 2 x 4, and 5/4 x 6 PTSYP
Basement stair railings: 4 x 4 posts, 2 x 4 rails, vertical slats from 1" knotty pine v-match boards
Subfloor: 3/4" T&G AdvanTech®

Exterior Walls

Interior Walls

Framing: 2 x 4 or 2 x 6 shoe, double plate, studs (24" O.C. as standard unless otherwise instructed to design 16" O.C.), blocking, headers, and fillers as necessary
Wall boards: 1" knotty pine v-match boards
Interior JELD-WEN® Morgan® door package
Interior locksets: Schlage®

Ceilings

Flooring: ¾" T&G AdvanTech®
Beam ceiling: 4 x 8 spruce joists, joist hangers as required and 2" v-match flooring for loft
Flat ceiling board: 1" knotty pine v-match boards
Interior railings: 4 x 4 posts, 2 x 4 rails, vertical slats from 1" knotty pine v-match boards

Roof

Windows

Windows: Andersen® 200 Series Tilt-Wash double-hung and casement with insulating glass or Low-E and full screens (no grilles). Colors: White - Sandtone.
Grilles

Exterior Doors

Therma-Tru® Classic-Craft® pre-hung and weatherstripped
Andersen® Narroline® 200 Series gliding patio door with insulating or Low-E glass, complete with screens, hardware and lockset Colors: White - Sandtone. (no grilles)
Grilles

LOG SIDING GARAGE MATERIALS

Sills: 2 x 4 PTSYP
Wall framing: 2 x 4 framing, 24" O.C. with window and door headers as required
Wall sheathing: 7/16" square edge OSB and #15 felt paper
Log siding: Milled ship-lap log siding for walls and gables, Eastern White Pine, preservative treated
Roof framing: Pre-built truss rafters with ladder and fly rafter materials and hardware NOTE: We do not supply temporary or permanent bracing.
Roof sheathing: 5/8" square edge OSB
Fascia: 1" knotty pine boards
Soffit: 1" knotty pine v-match boards
Andersen® 400 Series Low-E4 glass Tilt-Wash double-hung and casements with screens. Colors: White - Sandtone - Terratone® - Forest Green
Service door: 3'0"x 6'8" pre-hung Therma-Tru® Smooth-Star® fiberglass door system (no grilles)

OPTIONAL MATERIALS

Exterior Walls

Log siding corner projections
Windows: Andersen® 200 Series Tilt-Wash double-hung and casement with insulating glass and full screens (no grilles). Colors: White - Sandtone.

NOTE: Nominal dimensions are used in describing the above lumber sizes.